QT-8-15 Fully automatic brick making machine
Introduction:
Cement brick refers to the use of cement and fly ash, sand, stone powder, slag, coal gangue and other materials as raw materials, without calcining, brick by brick machine after extrusion forming. Cement block is very widely used, it is one of the new environmental protection wall materials in domestic. Mainly for the production: baking-free brick, energy saving brick, brick building, load-bearing brick, brick building, cement brick, concrete brick, brick of slag, fly ash brick, fill in the blanks brick, brick of environmental protection.
Raw Material:
Brick machine can be widely used: cement, concrete, stone, stone slag, slag, sand, gravel, stone, red aluminum slag, electrolytic copper slag foaming, big and small river sand and river sand, fly ash, lime, waste brick, coal gangue, construction waste, cinder and waste, slag, and the material who can combined into cement all can be used. Abundant raw materials can be seen everywhere, investment in factories is extremely convenient.
Technical parameter:
Molding cycle |
15-20seconds/time |
Wood plate specification |
1000×880×40(mm) |
Rated pressure |
16MPa |
Max. pressure |
31.5MPa |
Power |
35.5kw |
Weight |
8.8T |
Specification |
6100x2800x2660(mm) |
Production:
Item |
Specification |
Block/plate |
Block/day |
Block/year |
Standard brick |
240x115x53mm |
42 |
76,800 |
46,080.000 |
Hollow brick |
390x190x190mm |
8 |
17,280 |
10,368.000 |
Holes brick |
240x115x90mm |
21 |
40300 |
23,040.000 |
Roads brick |
200x100x60mm |
22 |
42240 |
251,420.000 |
Features:
Hydraulic pressure forming, compact structure, good stability, high yield production.
1.Hydraulic pressure and vibration, produce the finished product high compactness, high compressive strength.
2.Special electronic batching machine to different bricks, maintain the strength of the brick, density uniform, uniform appearance, and can improve the working efficiency.
3.Adjustable PLC control cabinet adopts the automatic and manual two panels in one of the new technology, to achieve automatic panels in production under the condition of sudden fault, immediately knobs to manual panels, production can be carried out, ensure production of normalization, in order to improve work efficiency.
4.Mould replacement convenient and quick, accurate positioning, do not need to check, save time and effort.
5.The other configuration have electronic grading for bin, automatic hydraulic machine, etc, it is available for users to realize full automation production.
Features of the cement brick:
1.Cement block itself is lighter in weight, and high strength, no fire, no pollution, it is the best choice to replace clay brick.
2.The current investment cement brick factory phenomenon is very common, because the cement block brick process cost is low, product variety, wide range of uses and the equipment investment is small,it is easily accepted by the market.
3.East China machinery through process improvement and finished product testing, my company's cement block machine brick intensity can be up to 10 mpa, to fulfill the requirements of national standards, and strength more than traditional clay brick.